ACRYLIC TURNTABLE MAT TEXTURED blue with label recess

 

This DELTA DEVICE Tuning Support Platter
is available in thickness 4mm.

Material: ACRYLITE® Textured Blue, bottom side grinded

colour: blue

 

Material: ACRYLITE® Textured Blue, bottom side grinded

This tuning component was developed for devices with GLASS or METAL-platters.

Big and expensive METAL devices will rather remind you of CD-sound.
Mostly they have energy-guzzling GUMMATS, due to cheaper production.
This also applies to the FELTMAT.
It can sometimes happen that the FELTMAT gets stuck on the platter.

The two materials METAL and FELT are real dust catchers and not easy to clean.
This way, your expensive record becomes a magnet for dust
and everybody knows the result, when record grooves get dusty!

 

 

Thanks to the brilliant attributes of PLEXIGLAS® the record´s data can be replayed in original quality.
This tuning device not only looks nice, it also sounds nice!

... The sound will be of higher resolution
... The treble response is more precise
... The midrange gets fuller and silkier
... The bass is tighter and more controlled
 

 

 

This tuning device was developed with 20 years of experience in processing and handling of PLEXIGLAS® materials and turntable fabrication.
You will get a Certificate of Authenticity for this item.

 

 

Application
• take off the felt- respective the gummat
• put the support plate on the plate
• tone arms of many devices don´t have to be adjusted
• it´s recommended to use two clean-brushes
- one for the support platter
- and one for your record
 

 

Care Instructions

 

use warm water if it´s stronger dusted

 

dry it with a soft cotton cloth

 

never use alcoholic cleaning agents

 

The combination with the DELTA DEVICE Record Puck made out of vinyl-like material or out of PLEXIGLAS® gives even better results
Suggestion: ca. 260g damper for 180g & 200 g LPs

 

 

 

PLEXIGLAS® is a registered trademark of Evonic Röhm GmbH and stands for highest quality!