• MANUFAKTUR FÜR PLATTENSPIELER ZUBEHÖR & ACRYL DESIGN
  • AUTORISIERTER ANALOG / PHONO FACHHÄNDLER
  • FREIHAUS AB € 29,-
  • 2% Skonto bei Vorabüberweisung
  • 5% Extra-Rabatt ANGEBOT mit Gutscheincode: PLATTENSPIELER
  • MANUFAKTUR FÜR PLATTENSPIELER ZUBEHÖR & ACRYL DESIGN
  • AUTORISIERTER ANALOG / PHONO FACHHÄNDLER
  • FREIHAUS AB € 29,-
  • 2% Skonto bei Vorabüberweisung
  • 5% Extra-Rabatt ANGEBOT mit Gutscheincode: PLATTENSPIELER

TAD VTA-Rega Unterlegscheibe Spacer 3,5mm Distanzring einfache Höhenjustage für alle 3-Punkt Tonarme

Artikelnummer: 29200221

35,00 €
inkl. MwSt., zzgl. Versand
lieferbar - Unser Betrieb ist bis 31. März 2024 geschlossen. Frühester Versandtermin ist der 01. April 2024. Vielen Dank für Ihr Verständnis.
Lieferzeit: 5-7 Tag(e)

Beschreibung

REGA 3-Punkt VTA Spacer Set 1 small - Gesamthöhe 3,5mm (Edelstahl)

Set bestehend aus: 1x 0,5mm 1x 1,0mm 1x 2,0mm

  • für Rega Tonarme mit 3-Punkt-Befestigung
  • einfache Befestigung
  • 2-teiliger Spacer (Distanzscheibe)
  • zusätzliche Befestigungsschrauben werden nicht benötigt
  • von TAD Audio (Rega Deutschlandvertrieb) zur einfacheren Montage entwickelt

Informationen von Rega

Some other manufacturers cartridges may have a deeper body than Rega cartridges, these will sometimes require the use of the three point spacer to allow clearance of the rear of the cartridge from the vinyl.

When Rega arms are fitted to turntables from other manufacturers it may be necessary to add arm spacers to achieve the correct arm height.

Note: On Rega turntables spacers should not be necessary unless you are you using an exceptionally deep bodied cartridge from another manufacturer.

Arm height or V.T.A (Vertical Tracking Angle) adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.

Empfehlung des Herstellers Ortofon

  • zum Beispiel für die 2M und Quintet Serie
    3.2 - 4 mm spacers should be enough for 2M and Quintet cartridge.
    Diese Informationen finden Sie auch direkt auf der Ortofon Herstellerseite HiFi "Replacement Cartridges Selector"

TAD Audio VTA Spacer Set - Übersicht

VA-Spacer Set 1 small: Gesamthöhe 3,5mm
1 x 0,5 mm, 1 x 1,0 mm, 1 x 2,0 mm

VA-Spacer Set 2 big: Gesamthöhe 6,5mm
1 x 0,5 mm, 1 x 1,0 mm, 1 x 2,0 mm, 1 x 3,0 mm

VA-Spacer Set 3: Gesamthöhe 2,0mm
1 x 2,0 mm

VA-Spacer Set 4: Gesamthöhe 3,0mm
1 x 3,0 mm

VA-Spacer Set 5: Gesamthöhe 1,5mm
1 x 0,5 mm, 1 x 1,0 mm

Produktbeispiel (siehe letzte Foto):

Rega Planar 3 mit Delta Device 24mm Upgrade Acrylteller und 180g Vinyl Puck montierter Ortofon 2M Blue mit empfohlener Höhenverstellung von 3,5mm (Tonarm Spacer 3mm+0,5mm aus TAD Spacer Set 2 big) und Exzenter Tonarmgewicht - ermöglicht den Betrieb der Rega Plattenspieler mit geschlossener Staubschutzhaube wenn eine VTA-Korrektur von mehr als 3mm notwendig ist.

Zusätzliche Produktinformationen

Kategorie
Tonarme (Tonarmlift, Gegengewichte, Spacer)